Cutting table for tilers – Grinding tiles without dust!

Specially developed for the cutting or processing of hard stone or ceramic tiles, in which the dust is extracted from both the underside and the top.
The Dustbox has been tested and approved by TNO for 8 hours of working with ceramic or natural stone tiles.
This means that you can use the entire day of the DUSTBOX without exceeding the maximum permissible dust concentration per day.
Only connect your own angle grinder and you can start. A few benefits at a glance:
* stands firmly on the ground by means of 4 rubber feet.
* is easy to carry with the sturdy handle.
* has a large workload of 27 x 39 cm.
* has a large storage place for accessories.
* the openings are closed by screw caps on both sides.
* the top is made of wood, to prevent damage.

When you release the fastener and open the lid, you will find all the parts in the suitcase.
Please unpack everything and check that you do not miss any parts.

The set comes complete and fits 99% on your own professional angle grinder *):
Cutting table with a worktop of 27 x 39 cm and 2 sealing caps (less dust loss during transport)
1 m hose with 2 connection fittings (extractor-cutting table)
1 universal connection coupling 38 mm (110) or 51 mm (120), for connecting the vacuum cleaner.
1 connection ring (4) for Bosch 125 mm.
1 connection ring (6) for Makita 125 mm.
1 connection ring (8) for Metabo 125 mm.
1 connection ring (9) for Hitachi 125 mm.
1 sachet with glue, hex keys and screws.

Assembly instruction:
Mount the hood by means of one of the supplied connecting rings on your professional angle
sharpener. You can look up your type in the reference list. A reference number is mentioned between brackets
which corresponds to the reference number on the packaging of the connecting ring.
The installation is described in the supplied manual for the extraction hood W-125.
In most cases, you must have a good fit with the accompanying rings. There are many professional ones
angle grinders on the market and it can happen that you have a machine for which no ring is included.
In this case, check whether your machine is listed on the accompanying reference list. Have you found him then fill
attached form and send this return incl. the delivered rings in the box.
You will receive from us within a few days, free of charge, the appropriate ring you have requested.
If your professional angle grinder is not in the reference list, we kindly request you the sizes
of your angle grinder to be measured and filled in on the form “Request new ring”.